Notes For Replacing The Board; Notes For Replacing The Connector On The Board; Notes For Hdc1400 And Hdc1580 - Sony HDC1000 Maintenance Manual

1-6-2. Notes for Replacing the Board

Replace the board with a board of the same number as the spare part number of the board to be removed
when replacing a board.
Example: A spare part number is put on the board.
Spare part number

1-6-3. Notes for Replacing the Connector on the Board

There are two types of connectors for the flexible card wire mounted on the board used in this unit.
Distinguish them in the procedure below when replacing these connectors.
1. The contact surface of the connector used for a board is gold when the conductive part of a flexible
card wire is gold.
In a spare parts list, (GOLD) is put after the part name.
2. The contact surface of the connector used for a board is silver when the conductive part of a flexible
card wire is silver.
In a spare parts list, (SILVER) is put after the part name.

1-6-4. Notes for HDC1400 and HDC1580

The contact of flexible card wire used in the HDC1400 and HDC1580 is gold-plated. Therefore, when the
flexible card wire needs to be replaced, use the part listed below.
Also, for the board on which a connector whose contact surface is gold is used, "G" is put after the board
name by silkscreen printing or a "G" seal is attached to the empty space on the board. Example: CN-
2619G
Board Flexible card wire
Pin Gold : Parts No.
CN-2619G 40 1-833-557-11
CN-2621G 36 1-831-663-11
MB-1059G 36 1-831-661-12
CN-2579G 40 1-831-658-11
CN-2579G 30 1-831-656-11
DR-528G 45 1-831-659-11
*1, *3: For HDC1580
*2, *4: For HDC1400
1-20
A spare part number is put on side A or B of the board
A-1159-990-A
by silk-screen printing or a spare part code label (spare
part number) is attached on side A or B.
Board
MB-1059G
MB-1059G
SW-1273G
PA-317CG *1 /PA-317G *2
DR-528G
TG-243CG *3 /TG-243BG *4
HDC1000/V1(E)