Rpn Adjustment - Sony HDC1000 Maintenance Manual

3-3-7. RPN Adjustment

Preparation
. Adjust the color monitor manually for better display
condition.
. Setting for MSU-900
CLOSE button → ON (lit)
DETAIL button → OFF (lit)
MASTER GAIN → 12
. Menu setting
MENU: SERVICE
PAGE: OHB_ADJ2
CONC. TEST MODE → ON
ITEM:
Adjustment Procedure
. 1080_59.94i/50i/29.97PsF/25PsF/23.98PsF
1. Adjustment Item:
MENU: SERVICE
PAGE: OHB_ADJ1
ITEM: DC_ADJ_B [R1], [G1], [B1]
Specification:
Adjust so that the dots displayed on the
color monitor (R/G/B: four dots each) are
of the same brightness.
2. Execute file storing.
MENU: SERVICE
PAGE: OHB_ADJ1
ITEM: STORE FILE
3. Adjustment item
MENU: SERVICE
PAGE: OHB_ADJ2
ITEM: DC_ADJ_C [R1], [G1], [B1]
HDC1000/V1(E)
R
G
B
Color monitor
Specification:
Adjust so that the dots displayed on the
color monitor (R/G/B: four dots each)
disappear.
4. Execute file storing.
MENU: SERVICE
PAGE: OHB_ADJ2
ITEM: STORE FILE
. 1080_59.94P/50P
1. Adjustment Item:
MENU: SERVICE
PAGE: OHB_ADJ2
ITEM: SH_ADJ_A [R1], [G1], [B1]
SH_ADJ_A [R2], [G2], [B2]
Specification:
Adjust so that the dots displayed on the
color monitor (R/G/B: four dots each)
disappear.
The left 2 out of 4: SH_ADJ_A [R1], [G1], [B1]
The right 2 out of 4: SH_ADJ_A [R2], [G2], [B2]
2. Execute file storing.
MENU: SERVICE
PAGE: OHB_ADJ2
ITEM: STORE FILE
n
If the residual point noise (RPN) still remains after the
RPN adjustment, perform the RPN compensation (Section
3-10). However, this function is available for Software
Version 1.11 and higher.
R
G
B
Color monitor
R
G
B
Color monitor
3-13