2-3. Replacing the Filter Disk Unit
2-3-1. HDC1000
1. Open the right side panel. (Refer to Section 1-4.)
2. Disconnect the harness of the filter disk unit from the
connector of the CCD unit.
3. Loosen the two fixing screws of the filter disk unit,
and remove the filter disk unit.
Fixing screw of the
filter disk unit
(with stopper)
Filter disk unit
Fixing screw of the
filter disk unit
(with stopper)
4. Install the filter disk unit by reversing the steps above.
n
In installation, do not touch the surfaces of filters.
HDC1000/V1(E)
2-3-2. HDC1400/1500/1550/1580
1. Remove the inside panel. (Refer to Section 1-4.)
2. Disconnect the harness of the filter disk unit from the
connector of the CCD unit.
3. Loosen the two fixing screws of the filter disk unit,
and remove the filter disk unit.
CCD unit
4. Install the filter disk unit by reversing the steps above.
n
Connector
In installation, do not touch the surface of filters.
CCD unit
Fixing screws of the
filter disk unit (with stopper)
Filter disk unit
Connector
2-7