Sony HDC1000 Maintenance Manual page 123

Reading the Reference File from the Memory Stick (Refer to step 3 of Fig. 4-4.)
Using FILE/MAINTENANCE Menu of This Unit
(1) Reference File data stored in the camera can be changed by reading the Reference File data stored in
the memory stick.
(2) The Reference File data in the memory stick cannot be applied to the camera when the data are just
read. For applying the data, adjust the level automatically.
[MAINTENANCE] → [AUTO|SETUP] → [AUTO|LEVEL]
n
Reference File data stored in the memory stick cannot be read when the power is just turned on.
Storing the Reference File to the Memory Stick (Refer to step 1 of Fig. 4-4.)
Using FILE Menu of This Unit
Stores Reference File stored in the camera in the memory stick.
Initializing All File Items (Refer to step 4 of Fig. 4-4.)
Using FILE Menu of This Unit
Camera unit
Current paint data
(Step 2)
Output to hardware
Fig. 4-4. Operating Procedure for Reference Files
HDC1000/V1(E)
Storing in
Readng from
memory stick
memory stick
(Step 1)
(Step 3)
Storing
(Step 1)
Reference File
Calling
Memory stick
Initializing
(Step 4) Reference File
factory-set value
(Initial value 0)
4-7