2-9-3. HDC1550 (TRIAX Assembly)
1. Remove the outside panel. (Refer to Section 1-4.)
2. Peel the UL tape off.
3. Remove the screw to detach the FL cover.
4. Remove the two screws, and lift the FL base up.
B2.6 x 5
FL cover
B2.6 x 5
5. Disconnect the harness and coaxial cable from the
connectors (CN1, CN2) on the FL-337 board.
2-20
UL tape
B2.6 x 5
FL base
Outside panel
FL-337 board
CN1
CN2
6. Remove the four screws, and pull out the TRIAX
assembly.
Outside panel
TRIAX assembly
7. Install the TRIAX assembly by reversing the steps
above.
n
Replace the UL tape with new one.
B3 x 8
B3 x 8
HDC1000/V1(E)