Notes On Replacing The Lens; Selection Of Spacer Plate When Mounting The Imager Board; Adjustment After Replacing The Lens - Sony ZV-1 Service Manual

2-3. Notes on Replacing the Lens

When replacing the lens, read the QR code of the repair lens.
To read the QR code, start the Adjust manual and press the QR code reader button.
The read data is used in the following processes.
•

Selection of Spacer Plate when mounting the imager board

•

Adjustment after replacing the lens

2-3-1. Selection of Spacer Plate when Mounting the Imager Board
1. Load the Spacer Plate on the QR code reader screen.
2. The thickness of the Spacer Plate to be loaded is displayed.
3. Select the Spacer Plate according to the instructions on the screen and mount the imager board.
2-3-2. Adjustment after Replacing the Lens
Perform LOAD from "Lens data carry" on the ADJUST tab in the Adjust manual.
QR code
Sony CONFIDENTIAL
For Authorized Servicer
9
SYS SET