Operator File - Sony HDC1000 Maintenance Manual

4-2. Operator File

Operator File stores data in the memory stick.
Storing and reading data are implemented using the setup menu.
m
. Operator file data stored in the memory stick cannot be read when the power is just turned ON.
. The current operator file data is retained even when the power is turned off by the power switch.
. Before storing the data in the memory stick, make sure that the LOCK switch on the memory stick is in
OFF position.
Storing (Refer to step 1 of Fig. 4-2.)
Using OPERATION Menu of This Unit
Stores the current status in the memory stick.
Reading (Refer to step 2 of Fig. 4-2.)
Using OPERATION Menu of This Unit
Memory stick
Reading Storing
(Step 2) (Step 1)
Camera unit
Calling
(Step 3) Initializing
(Step 5)
Preset Operator File
Current Operator
Preset Operator File
Factory-set
File Data
value
Storing
(Step 4)
Output to hardware
Fig. 4-2. Operating Procedure for Operator Files
4-2
HDC1000/V1(E)