Sony HDC1000 Maintenance Manual page 140

WHITE SHADING
<WHITE SHADING> S09 TOP
[R] [G]
→
V SAW : 00 00
V PARA : 00 00
H SAW : 01 00
H PARA : 00 FF
WHITE : 0 0
W CLIP CODE: 7E
STORE FILE: EXEC
COLOR_TEMP_SEL: 3200K
The WHITE SHADING menu is used for adjustment of
the white shading.
DAP/AU-ADJ
<DAP/AU-ADJ> S10 TOP
BOARD-TEST : OFF
TRUNK-TEST : OFF
→
INCOM1-GAIN: 60dB
INCOM2-GAIN: 60dB
MIC1-GAIN : 60dB
MIC2-GAIN : 60dB
2003/03/16 22:06:00
RESET DATA : EXEC
The DAP/AU-ADJ menu is used for setting of the DAP
board and AU board.
SDI
<SDI> S11 TOP
→
TEST MODE : OFF
RX CRC ERR : 0
CRC ERR RESET: EXEC
STATUS : 10110011
OPT LEVEL : 0.00V RED
TEMP SDI : 43dC
SDI2-VBS : OFF
PROMPTER : 1CH
The SDI menu is used to display the SDI board status.
EXT RETURN
<EXT RETURN> S12 TOP
EXT RET IN: VBS
STATUSE : OK
FORMAT : NTSC
SD ASPECT : SQ
The EXT RETURN menu is not used.
5-4
[B]
00
00
00
00
0
RAM FUNCTION
<RAM FUNCTION> S13 TOP
RAM FUNC
→
STANDALONE: DOWNCONV
CCU : DOWNCONV
The RAM FUNCTION menu is used to change the priority
of the memory functions.
DOWNCONV
The output of the down-converter is pulled down in the
23.98PsF, 24PsF, or 25PsF format.
LETTERBOX
The output of the down-converter is enabled when LET-
TER BOX is set. When RAM FUNC is set to LETTER-
BOX, SQ/ LB is selectable for ASPECT in DOWN
CONVERTER of the MAINTENANCE menu.
However, in the 23.98PsF, 24PsF, or 25PsF format, even if
LB is set, the output of the down-converter is not enabled
with LETTER BOX set. The down-converter setting is
available only for the main signals, but is not available for
the return and VF signals.
HDC1000/V1(E)