Abnormal Alarm Config; Figure 48: Gvr3550 Abnormal; Table 21: Gvr3550 Abnormal - Grandstream Networks GVR3550 User Manual

ABNORMAL ALARM CONFIG

Abnormal Alarm Config includes Disconnection Alarm, HDD Empty Alarm, HDD Full Alarm, HDD Error
Alarm and IP Conflict Alarm. See Figure 48 below. Users can set the alarm actions after selecting the
corresponding alarms.
Table 21: GVR3550 Abnormal Alarm Parameter Explanation:
Parameter
Disconnection Alarm
HDD Empty Alarm
HDD Full Alarm
HDD Error Alarm
IP Conflict Alarm
Users could set various alarm actions like Screen Prompt, Beeper, HDMI Alarm, Send Email, or Copy
Alarm to Other Camera. The Parameters settings are the same in chapter Camera Event Settings.
Grandstream Networks, Inc.
Figure 48: GVR3550 Abnormal Alarm Config Page
Alarm when detecting no cable access
Alarm when detectng without HDD access
Alarm when HDD is fuill
Alarm when detecting HDD error
Alarm when the IP address is conflict with the GVR address
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
Page 65 of 120
Last Updated: 10/2014