Table 9: Gvr3550 Previews - Grandstream Networks GVR3550 User Manual

Table 9: GVR3550 Preview Status Explanation:
Icon Name
Motion Detection
Alarm
Camera Lens
Occlusion Alarm
Missing Object
Alarm
Foreign Object
Alarm
I/O Alarm
Record
Add Camera
--
Camera View
Camera
connection
Failed
Video Decoding
Failed
On the preview page, the record and alarm status of each camera could be distinguished by the tag on the
top right corner of each camera.
A dialog box will pop up in the center screen to prompt the users if there is an abnormal alarm, as shown in
figure below, the prompt box would disappear in 3 seconds.
Grandstream Networks, Inc.
Alarm when detecting dynamic motion.
Alarm in the corresponding camera when the remote camera is
obscured.
Alarm in the corresponding camera according to the alarm settings if
the remote camera supports missing object alarm and local missing
object alarm has been configured before.
Alarm in the corresponding camera according to the alarm settings if
the remote camera supports missing object alarm once local foreign
object alarm has been configured before.
Alarm when the remote camera is connected to IO alarm device
according to the alarm settings.
The monitoring camera is in record mode.
If there is no existing camera, click this button to quick enter the
camera settings page to add camera.
Live view camera.
Failed to connect the related IP Cameras.
It may be caused by protocol not supported, too large resolution and
exceeded the decoding ability.
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
Page 33 of 120
Last Updated: 10/2014