Basic View Operation; Figure 15: Gvr3550 Basicv; Iew Operation; Table 10: Gvr3550 Systema - Grandstream Networks GVR3550 User Manual

Table 10: GVR3550 System Abnormal Alarm Screen Explanation:
Icon Name
Disconnection
Alarm
HDD Empty
Alarm
HDD Error Alarm
HDD Full Alarm
IP Conflict Alarm

BASIC VIEW OPERATION

Users could put the cursor on one camera screen if needs to make basic operations to a particular camera.
Click to bring up the menu bar as shown in Figure 15. Click the buttons on the menu bar to make
corresponding operations.
Table 11: GVR3550 Basic View Operation Explanation:
# Icon
1 Close Record
Auto Record
Manual
Record
Capture
2
Mute/Unmute
3
4 Start /Stop
Intercom
5 PTZ Control
Grandstream Networks, Inc.
Alarm when the network is disconnected.
Alarm when no HDD detected.
Alarm when HDD is abnormal.
Alarm when HDD is full.
Alarm when detecting the IP address of another device is in conflict
with the GVR in the network.
Figure 15: GVR3550 Basic View Operation
Name
The camera is not recording now
The camera is in schedule record mode
The camera is in manual record mode
The external storage devices (USB) need to be connected first. Users
could configure the save path and set it to default
When the volume in on, if the remote camera is installed with audio
input device, users could listen in to the remote party
When the intercom in on, if the remote camera is installed with audio
output device, users could speak to the remote camera via local audio
input device.
Click to enable PTZ control to configure PTZ preset, patrol and pattern
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
Explanation
Page 34 of 120
Last Updated: 10/2014