Shortcut Button; Figure 22: Gvr3550 View Page - Grandstream Networks GVR3550 User Manual

6 Nine Screen
7 Sixteen Screen
Optimize System
8
Start/Stop All Day
9
Record
10 Start/Stop Patrol
11 Camera Config
12 Unload
NOTE:
 Please go to Menu->System Settings->Local View Control to set Patrol Intervals
before apply Start Patrol.
 Patrol would pause if users make any arbitrary operations in the process of patrol,
abort the operations to resume patrol.

SHORTCUT BUTTON

Click on the shortcut button in the lower left corner of the preview screen to bring up the shortcuts options
as shown in Figure 22. Users can enter the playback page or the main menu, login /logout or reboot the
unit.
Grandstream Networks, Inc.
Switch to 9 screen: IMG One-to-Nine, IMG Ten-to-Eighteen, IMG
Nineteen-to-Twenty-four
Switch to 16 screen: IMG One-to-Sixteen, IMG Seventeen-to-
Twenty-four
Automatically adjust the camera connection protocol and secondary
stream resolution, bit rate, frame rate and related parameters.
Reboot after the completion
Start All Manual Record. Once enabled, the menu item turns to "Stop
All Record". Click to stop all record including auto record
Enable Patrol. Once enabled, the menu item turns to" Stop Patrol".
Click to stop patrol then stay on the current screen.
Quick access the camera settings
Unload the inserted USB device
Figure 22: GVR3550 View Page Shortcut Button Menu
GVR3550 User Manual
Firmware Version 1.0.0.65
Page 42 of 120
Last Updated: 10/2014
