Table 37: Gvr3550 Remotep; O Peration E Xplanation - Grandstream Networks GVR3550 User Manual

Table 37: GVR3550 Remote Preview Operation Explanation:
# Icon
1 Closed Record
Manual
Record
2 Capture
3 Mute/Unmute
4 Start/Stop
Intercom
PTZ Control
5
6 Switch to Full
Screen
Instant
7
Playback
8 Image Config
9 Close Preview
Grandstream Networks, Inc.
Name
The camera is not recording now
The camera is in manual record mode.
The default path: C:\GVR_Record
The external storage devices (USB) need to be connected first.
Users could configure the save path and set it to default
C:\GVR_Capture。
Unmute to listen audio from remote IP Camera if the IP Camera has
microphone connected.
Mute to stop the auidio.
Start to allow audio input from PC to play out at remote IP camera if
remote IP camera has audio output device connected (e.g.: Speaker).
Stop to disable this process.
Enable basic PTZ operations preset PTZ preset, patrol, pattern
Switch the current screen to full screen or double click to enter full
screen mode
Playback the record in the preset time. It will prompt "The selected
camera has no record "if has no existing record. Users could set the
preset time in Basic System Settings chapter
Open configure interface to adjust current image
Close the preview window
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
Last Updated: 10/2014
Page 104 of 120