Preset; Figure 18: Gvr3550 Ptz C - Grandstream Networks GVR3550 User Manual

PRESET

When set PTZ to preset, users could add/delete/edit preset on the control panel below. The procedures are
shown in Figure 18.
1. Adjust the remote camera position via the PTZ steering control.
2. Click on to add a new preset.
3. Enter the preset name in the input box or just use the default name.
4. Click the check button
the name.
5. Double click one preset with mouse (or press the OK button on the front panel, or press the ENTER
button on the remote control) to activate it.
6. Users could click
Grandstream Networks, Inc.
Figure 18: GVR3550 PTZ Control Page – Preset
to save the preset, or click on
below the preset control panel to delete the preset.
GVR3550 User Manual
Firmware Version 1.0.0.65
on the right side of the preset to edit
Page 38 of 120
Last Updated: 10/2014