Hdd Detection; Figure 76: Gvr3550 S.m.a.r.t. D; Table 32: Gvr3550 Network - Grandstream Networks GVR3550 User Manual

Table 32: GVR3550 Network Diagnose Parameter Explanation:
Parameter
Network Test (Ping)
Diagnose Output
Path of file saving
Refresh
Start

HDD DETECTION

The GVR3550 provides S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) Detection and
Bad Sector Detection. Users could check HDD running status via HDD detection.
S.M.A.R.T detection provides a variety of detections on HDD heads, temperature, material of disk surface,
internal circuit, monitoring and forecasting the underlying problems of HDD that may occur in time.
S.M.A.R.T detection page is as shown in Figure 76 below.
Grandstream Networks, Inc.
Input the destination address, click on "Start" to initiate test,
click "Stop" to end test.
Display the diagnostic result of GVR3550and destination IP address.
Display the external device, users could choose one if there are multiple choices
Click to refresh the new access external device.
Click to initiate capture. The capture file will be saved in the directory of selected
external device.
Figure 76: GVR3550 S.M.A.R.T. Detection Page
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
Page 91 of 120
Last Updated: 10/2014