RECORD MODE CONFIG
Record Mode Configuration page is as shown in Figure 35 below, users could click one camera to set
Close Record, All Day Record and Schedule Record.
When set to "Schedule", users should select schedule in the drop-down list .Tap on
Or tap on "Close for All" or "All Day for All" to set cameras.
Grandstream Networks, Inc.
Figure 35: GVR3550 Record Mode Config Page
All day record Status:
Auto Record Status:
Close Record Status:
GVR3550 User Manual
Firmware Version 1.0.0.65
Enable all cameras to record.
Enable record via the camera.
Disable record via the current camera.
to add new schedule;
Page 52 of 120
Last Updated: 10/2014