Configuring Http Server - Grandstream Networks GVR3550 User Manual

CONFIGURING HTTP SERVER

In this chapter, we take using Apache HTTP Server2.2 server in windows XP to introduce the procedures
of configuring HTTP server.
Users could obtain the Apache HTTP server installation software via http://httpd.apache.org, please finish
the default installation according to the wizard.
1. Enable Apache server. Go to Start ->All Programs ->Apache HTTP Server 2.2 -> Monitor Apache
Servers in a PC which has installed with the Apache server. The icon
of taskbar indicates Apache server is already enabled. If displays
server;
Put the prepared file to the following path:
2.
Installation Path \ Apache Software Foundation \ Apache2.2 \ htdocs.
NOTE:
 If put the prepared file under the folder "htdocs", the URL format to access the Apache server is:
http:// The IP address of the PC that installed with the Apache server .e.g.:
 If put the prepared file under the subfolder of the folder "htdocs", the URL format to access the Apache
server is: http:// The IP address of the PC that installed with the Apache server/subfolder Name. e.g.:
http://192.169.1.51/filename
Grandstream Networks, Inc. GVR3550 User Manual
Firmware Version 1.0.0.65
in the notification area
, select Start to enable the
" "
http://192.169.1.51
Page 112 of 120
Last Updated: 10/2014