Table 17: Gvr3550 Camerae; Table 18: Gvr3550 Cameraa; Explanation; P Arameter E Xplanation - Grandstream Networks GVR3550 User Manual

Table 17: GVR3550 Camera Events Settings parameters Explanation
Parameter
Camera
Event Type
Alarm Enable
Alarm Schedule
Region Config
PTZ Linkage Config
Alarm Action
Table 18: GVR3550 Camera Alarm Parameter Explanation:
Parameter
Screen Remind
Beeping
HDMI Alarm
Email Notification
IP Camera
Record Delay (Second）
Alarm Output
Alarm Delay (Second)
Copy to other IPC
Grandstream Networks, Inc.
Select the camera user would like to configure
Motion Detection, Camera Lens Occlusion, Signal Loss, IPC External Alarm,
Missing Object Detection, Foreign Object Detection.
Tick to enable/unable alarm.
Select schedule in the drop-down list .
Set detection area to IPC with Motion Detection, Missing Object Detection and
Foreign Object Detection function. Users could set up to 16 detection areas.
Move the mouse to add areas and click on X in the upper right corner of the area
to delete it. Double click or right click the mouse to save the area and exit.
Only available to IPC with PTZ linkage function. For different IPC and camera
alarm event, users could set various alarm action: Screen Prompt, Beep, HDMI
Alarm, Send Mail, Alarm Output, Alarm Delay(s).Or copy the alarm action to
other cameras.
Set different alarm mode.
Click to send alarm to display screen
Click to beeping when alarm triggered
Click to send alarm to GVR3550 connected HDMI display device
Click to send email to configured email. Email Configuration:
Main Menu  Settings  System Settings  Email Settings
Click to select related alarm IP Cameras
Configure the time for alarm recording
Click to select Alarm Output
Configure Alarm Delay Timer (in Second)
Click to copy the alarm configuration to other IP cameras.
GVR3550 User Manual
Firmware Version 1.0.0.65

Explanation

Explanation
Page 54 of 120
Last Updated: 10/2014