Figure 77: Gvr3550 Hdd Bad; Table 33: Gvr3550 Hdd S.m.a.r.t D; D Etection P Age - Grandstream Networks GVR3550 User Manual

Table 33: GVR3550 HDD S.M.A.R.T Detection Parameter Explanation:
Parameter
Continue Using HDD
when Self-test Failed
HDD Number
Detection Type
Start
HDD Temperature
Usage Time
Detection Status
Evaluation Result
Overall Evaluation
The HDD bad sector could be detected via Bad Sector Detection as shown in Figure 77 below.
Grandstream Networks, Inc.
Continue to use the HDD if self-test failed in the process of S.M.A.R.T. detection..
HDD Number 1 - 4 will be allocated in sequence after HDD mounted,
The number will not be changed in the subsequence use
Set S.M.A.R.T. Detection type. There are three types: Short, Long, Conveyance
Click the button to initiate S.M.A.R.T. Detection
Display the HDD temperature S.M.A.R.T Detection detected.
Display the total usage time of HDD S.M.A.R.T Detection detected
S.M.A.R.T detection Result: Pass or Fail
S.M.A.R.T detection evaluation result: Good or Bad
Display the overall HDD status after detection
Figure 77: GVR3550 HDD Bad Sector Detection Page
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
Page 92 of 120
Last Updated: 10/2014