Grandstream Networks GVR3550 User Manual page 35

6 Switch to Full
Screen
7 Instant
Playback
8 Image Config
9 Encode Config
NOTE:

Start intercom will unmute the camera the same time. Close the intercom to mute the
camera.

When start intercom of one camera, if another camera has enabled intercom or unmute, turn
off it first then start intercom of the current camera.

If one camera has enabled intercom or unmute, unmute another camera will close
intercom/unmute the previous camera automatically.
Grandstream Networks, Inc.
Switch the current screen to full screen or double click to enter full
screen mode. Click
Playback the record in the preset time. It will prompt "The selected
camera has no record "if has no existing record. Users could set the
preset time in Basic System Settings chapter
Enter the corresponding setting page to adjust the current window
image.
Open interface to configure encoding parameters of IP Camera
GVR3550 User Manual
Firmware Version 1.0.0.65
or double click the screen to exit full screen.
Page 35 of 120
Last Updated: 10/2014