Table 23: Gvr3550 Basics - Grandstream Networks GVR3550 User Manual

Table 23: GVR3550 Basic System Setting Parameter Explanation:
Parameter
Language
Logout when
idle(Min)
Enable Pre-record(s)
When HDD Full
Auto start Boot
Wizard when up
Recording File
size(Clip/Backup)
Live View
Performance
Screenshot File
Saving Path
Playback Clips
Saving Path
Instant Playback
Start Time(Min)
Open SSH
Web Connection
Mode
Port
RTSP Port
Grandstream Networks, Inc.
Set the language to English or Chinese
Set the logout time when timeout. If logout, users need to login again to make
operations except preview.
Set pre-record mode. Once enabled, users could view the record images a few
seconds before alarm in alarm event
Set the record policy when HDD is full. "Overwrite Previous" means the new
record will overwrite the earliest ones when HDD is full of records. The default
setting is "Stop Record"
Set whether to enable wizard when boot up. Once ticked, the wizard will pop up
for installation
The file size of recording (Clips/Backups).Users could choose 256M or 512M.
Default is 256M.
Set the view performance to Least Delay, Best Fluency and Balanced. Least delay
emphasizes the fluency of the record while best fluency emphasizes the real-time
of the recording. The default setting is "Least Delay"
Set the default path to save the screenshot file when preview and playback
Set the default path to save the clipping file when playback
Set the start time for instant playback. The default is 5 minutes
Set whether to open SSH
Set the web connection mode to HTTP or HTTPS, the default is HTTP
Set the port No. of web connection, the default is 80.
Set the port number of RTSP, the default is 554.
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
Page 71 of 120
Last Updated: 10/2014