Figure 46: Gvr3550 I/O Alarm; Table 20: Gvr3550 Io Alarm; Xplanation; P Arameter E Xplanation - Grandstream Networks GVR3550 User Manual

Table 20: GVR3550 IO Alarm Config Parameter Explanation:
Parameter
Input Port
Event Type
Alarm Enable
Alarm Status
Port Name
Alarm Schedule
Grandstream Networks, Inc.
Figure 46: GVR3550 I/O Alarm Config Page
Select the input port No. Click to select the port No. of alarm input.
Select the event type like Input Alarm.
Tick to enable/disable the alarm.
Set the alarm status. Normally Open (default） and Normally Close are two
available options. Please choose the status according to your alarm type. Restart
to make changes take effect.
Enter the port name of the alarm input to distinguish different input ports.
Select alarm schedule in the drop-down list. If there is no existing schedule,
users could click
configure. See Figure 47 below.
GVR3550 User Manual
Firmware Version 1.0.0.65
Explanation
to add new schedule and enter the setting page to
Page 63 of 120
Last Updated: 10/2014