Compaq ProLiant ML350 Maintenance And Service Manual page 82

Table 3-2
POST Error Messages
continued
Error Code Audible Beeps
1771-Primary Disk None
Port Address
Assignment
Conflict
1772-Secondary None
Disk Port Address
Assignment
Conflict
1773-Primary None
Fixed Disk Port
Assignment
Conflict
1774-Slot X Drive None
Array – Obsolete
data found in Array
Accelerator. Select
F1 to discard
contents of Array
Accelerator. Select
F2 to write
contents of Array
Accelerator to
drives.
Probable Source of Action
Problem
Internal and external Run the server setup utility and correct.
hard drive controllers
are both assigned to
the primary address.
Address Assignment Run the server setup utility and correct.
Conflict. Internal and
external hard drive
controllers are both
assigned to the
secondary address.
Hard drive error Run the server setup utility and correct.
detected.
SMART-2 Controller Data found in array accelerator is older
error detected.
than data found on drives. Press F1 to
discard the older data in the array
accelerator and retain the newer data on
the drives.
Diagnostics and Troubleshooting 3-27
continued