Asr Integrated Management Log (Iml) Messages; Asr Iml Messages - Compaq ProLiant ML350 Maintenance And Service Manual

Proliant ml350
Hide thumbs Also See for ProLiant ML350:
Table of Contents

Advertisement

ASR Integrated Management Log (IML) Messages

The Integrated Management Log (IML) records memory errors, as well as catastrophic
hardware and software errors, that cause the system to fail. This information helps you quickly
identify and correct the problem, thus minimizing downtime.
You can view the IML through Compaq Insight Manager. The Diagnostics Utility either
resolves the error or suggests corrective action in systems that do not support event logs.
The IML identifies and records all the errors in Table 3-22.
Message
Abnormal Program Termination
ASR detected by ROM
ASR Test Event
Automatic Server Recovery
Base Memory Parity Error
Automatic Server Recovery
Memory Parity Error
Battery Failing
Caution: Temperature Exceeded
Diagnostic Error
Error Detected On Boot Up
Processor Prefailure
NMI – PCI Bus Parity Error
NMI – Expansion Board Error
NMI – Expansion Bus Master
Time-Out
NMI – Expansion Bus Slave
Time-Out
Table 3-22

ASR IML Messages

Description
The operating system has encountered an abnormal situation that has
caused a system failure.
An ASR activity has been detected and logged by the system ROM.
The System Configuration Utility generated a test alert.
The system detected a data error in base memory following a reset due to
the Automatic Server Recovery (ASR) timer expiration.
Corrupt system memory caused the OS to crash. Run Diagnostics to
identify the failed DIMM.
Low system battery warning. Replace battery within 7 days to prevent loss
of nonvolatile configuration memory. Failure of the battery supporting the
nonvolatile RAM in the system is imminent.
The operating system has detected that the temperature of the system has
exceeded the caution level. Accompanying data in the log notes if an
auto-shutdown sequence has been invoked by the operating system.
An error was detected by the Diagnostics Utility. See the specific error code
in this chapter for a detailed explanation.
The server detected an error during POST.
A CPU has passed an internal corrected error threshold; excessive internal
ECC cache errors.
A parity error was detected on the PCI bus.
A board on the expansion bus indicated an error condition, resulting in a
server failure.
A bus master expansion board in the indicated slot did not release the bus
after its maximum time, resulting in a server failure.
A board on the expansion bus delayed a bus cycle beyond the maximum
time, resulting in a server failure.
Diagnostics and Troubleshooting 3-71
continued

Advertisement

Table of Contents
loading

Table of Contents