Utilities Access; Running Compaq Utilities - Compaq ProLiant ML350 Maintenance And Service Manual

Utilities Access

The SmartStart and Support Software CD contains the SmartStart program and many of the
Compaq utilities needed to maintain the system, including:
I
Array Configuration Utility (ACU)
I
Erase Utility
I
Array Diagnostic Utility (ADU)
I
ROMPaq Firmware Upgrade Utilities
I
Compaq Diagnostics

Running Compaq Utilities

Compaq Utilities may be run from diskette or from the SmartStart and Support Software CD.
Running the Utilities from Diskette
I
Run the utilities from their individual diskettes. If you have a utility diskette newer than
the version on the SmartStart and Support Software CD, use that diskette.
I
Create a diskette version of the utility from the SmartStart and Support Software CD.
To create diskette versions of the utilities from the CD:
1. Start the SmartStart and Support Software CD.
2. From the System Utilities screen, select Create Support Software Disks, and then select
Next.
3. Select the diskette you would like to create from the list, and then follow the instructions
on the screen.
Running the Utilities from the SmartStart and Support
Software CD
IMPORTANT: Only the Array Configuration Utility (ACU) and the Array Diagnostic Utility (ADU) can be
executed from the SmartStart and Support Software CD. All other utilities must be executed from
diskette.
To run these utilities directly from the SmartStart and Support Software CD:
1. Start the SmartStart and Support Software CD.
2. From the System Utilities screen, select the utility you wish to run, and then select Next.
CAUTION: To avoid data loss to the entire system, do not select the Erase Utility when running
the SmartStart and Support Software CD.
Diagnostics and Troubleshooting 3-5