Compaq ProLiant ML350 Maintenance And Service Manual page 66

Table 3-2
POST Error Messages
continued
Error Code Audible Beeps
207-Invalid None
Memory
Configuration –
Check DIMM
Installation
208-Invalid 1 long, 1 short
Memory Speed –
Check DIMM
Installation
209-Memory 1 long, 1 short
Detection Failure.
Check Memory
Installation
211-Invalid None
Voltage Regulator
Module installed
for Processor X
212-System 1 short
Processor
Failed/Mapped out
214-DC-DC None
Converter Failed
214-Memory 2 short
Device Failure.
Error Code:X
Memory Module
DIMM:Y
214-Processor None
PPM Failed,
Module X
215-Processor None
Power Module has
lost Redundancy
in Socket X
Probable Source of Action
Problem
Memory module Verify placement of memory modules.
installed incorrectly.
Speed of the Verify the speed of the memory
memory is not modules installed, then check the
compatible. server user documentation and replace
as indicated.
Unable to size Check memory module installation and
memory. if error persists, call Compaq authorized
service provider.
Nonredundant PPM Replace with a PPM that supports
installed in indicated redundancy.
processor slot.
Processor in slot X Run Diagnostics and replace failed
failed. processor.
PPM failed. Run Diagnostics. Replace failed
assembly as indicated.
A memory module Run Diagnostics. Replace failed
has failed. memory module as indicated.
Indicated PPM failed. Replace failed assembly as indicated.
PPM (DC-DC Run Diagnostics. Replace failed
converter) has lost assembly as indicated.
redundancy.
Diagnostics and Troubleshooting 3-11
continued