Abus TVAC16000B User Manual
7" touchscreen wireless monitor and the ir wireless outdoor camera
Hide thumbs
Also See for TVAC16000B:
- User manual (139 pages) ,
- User manual (29 pages) ,
- User manual (119 pages)
Related Manuals for Abus TVAC16000B
Summary of Contents for Abus TVAC16000B
-
Page 1: User Guide
TVAC16000B User guide Version 01/2013 Original user guide in English. Retain for future reference! - Page 2 ABUS Security-Center GmbH is not liable or responsible for direct or indirect damage resulting from the equipment, performance and use of this product. No forms of guarantee are accepted for the contents of this...
- Page 3 English Explanation of symbols The triangular high voltage symbol is used to warn of the risk of injury or health hazards (e.g. caused by electric shock). The triangular warning symbol indicates important notes in these operating instructions which must be observed. This symbol indicates special tips and notes on the operation of the unit.
- Page 4 English Wireless transmission The wireless range depends on a variety of environmental factors. The local conditions at the installation site may have a negative impact on the range. When there are no obstructions between the receiver and transmitter, a range of up to 150m is possible, but this range will be considerably less within buildings. The following environmental conditions compromise both the range as well as the frame rate: Mobile communication masts, high-tension pylons, electrical wires, ceilings and walls, devices with the same or an adjacent wireless frequency.
-
Page 5: Table Of Contents
English Contents Intended use ..........................6 Scope of delivery ........................6 Features and functions ......................6 Device description ........................7 Monitordescription ......................7 Docking station description ....................7 Camera description ......................8 Installation ..........................9 Installing the monitor ......................9 Pairing the camera and the monitor .................. -
Page 6: Intended Use
You have the option of connecting up to four cameras (TVAC16010) to the monitor and displaying them in the 4x camera view. You can also view the live images of the camera using the ABUS “TVAC16000” app provided the monitor is in the docking station and connected to the internet. -
Page 7: Device Description
English 4. Device description 4.1 Monitordescription Power button Antenna Fold-up stand SD card slot Reset button 5VDC/1A power supply 4.2 Docking station description Docking interface monitor LAN interface Power supply 5VDC/1A... -
Page 8: Camera Description
English 4.3 Camera description Antenna Fixed lens Power LED Link LED IR LED Photo sensor Camera mount Microphone Pairing button Power supply connection 5 VDC / 1A Meaning of the LEDs: Status Meaning Power LED O On (red) Camera on Camera off Link LED P Flashing... -
Page 9: Installation
English 5. Installation 5.1 Installing the monitor Connect the power supply unit to the monitor. Switch the device on. Press the power button for about 5 seconds. Important: Please note that if the monitor does NOT have an external power supply, it must be charged for at least 8 hours prior to being used for the first time. -
Page 10: Connecting The Docking Station To The Network
English 5.3 Connecting the docking station to the network To connect the docking station to the internet, proceed as follows: Connect the network cable to your router and the docking station. Connect to the network only after you have made all the required settings on the monitor. The network settings are described in 6.4.3. -
Page 11: Operation
English Screw the camera onto the mount and connect the power supply unit to the camera. 6. Operation To switch the monitor ON / OFF, press and hold down the power button for at least 5 seconds. 6.1 Main menu Live view Event list Settings... -
Page 12: Live View
English 6.2 Live view Explanation of symbols SD card display No SD card Tip: Always switch off the device before removing the SD card. Note that the device does not have a cyclic recording SD card detected and function. Once the SD card is full, no more recordings can be almost empty saved. - Page 13 English Timer Schedule has been saved This symbol appears if a programmed recording is running. Recording status Flashes red: the device is recording If you press the REC symbol directly, you start a manual recording. Select this again to stop the recording. Constantly red: device is not recording Camera number and reception...
- Page 14 English Network connection This option is only available if the monitor is on the docking station and the network cable is connected to the docking station as well as the router. Press the network symbol and select whether the object should be connected to the internet or whether the device should just be charged.
-
Page 15: Event List
English 6.3 Event list All the recordings are displayed in the event list and are sorted according to the date. 6.3.1 List of recordings Press the date with the green background to go to the list of recordings. The recordings are saved to sub- folders which are named with the date on which the recording was made. -
Page 16: Deleting Recordings
English Explanation of symbols Live view Change to live view Back Back to the main menu Select one of the numbered cameras to view the recordings. Camera Select the camera with “A” to view the recordings of all the cameras. Weekday Here you see the weekday A field with a green background means that a recording is... -
Page 17: Settings
English 6.4 Settings At the “Settings” menu item you can select the following items: 6.4.1 Camera settings c Selecting cameras to pair 1. Select the required camera (1-4). The system counts down from 60 seconds. 2. During the 60 seconds, press the PAIRING button on the camera cable until the green LINK LED on the front of the camera starts flashing. -
Page 18: Recording Settings
English d Displaying/concealing a camera Use the 9 buttons to display a camera or press the 8 button to conceal it. If you have not trained all four cameras, conceal the other cameras. e Camera brightness Select the required brightness from between -2 (dark) to 2 (bright). - Page 19 English Motion detection Here you can set the sensitivity of the motion detection for each camera. You can choose between “Low”, “High” and “Off”. High: Motion detection with high sensitivity Low: Motion detection with low sensitivity Off: Motion detection is off. Motion is not recorded. Alarm alerts via email You can have an alarm alert sent to you via email as soon as the camera detects any motion.
-
Page 20: Network Settings
English Timer recordings You can save a recording time to start recording at a very specific time. You can save up to 5 recording procedures. First select the number of the camera. Set the start and stop time. To do this use the arrow buttons. - Page 21 English Securitycode The standard security code is: 123456 For reasons of security, change this code and enter a new password (max. 8 digits). Press the field with the white background and a keyboard appears. Then confirm with “OK”. You will need the security code later if you want to access the cameras via the app.
-
Page 22: Alarm Settings
English 6.4.4 Alarm settings Duration Here you can select the required duration of the alarm. You can set the alarm duration individually: 2 seconds, 10 seconds, 30 seconds or no sound. Press any button to switch off the alarm in the event of an alarm. -
Page 23: System Settings
English 6.4.5 System settings Energy saving mode Here you can activate or deactivate the automatic screen switch-off after 2 minutes. If the energy saving mode is activated, your battery lasts roughly half an hour longer. Automatic lock If the automatic lock is activated, the monitor no longer responds to the touch function after a few minutes. - Page 24 English Setting the time // date Here you can set the date and time. Then save your entries. Note: AM = 00:00 – 11:59 PM = 12:00 – 23:59 Saving the time // timer You have the option of programming a timer / countdown.
- Page 25 (item number TVAC16000B). To download, please proceed as follows: Remove the SD card from your monitor and insert it in a SD card reader which is connected to your computer.
-
Page 26: Remote Access Via App
English 7. Remote access via app This 7" touch screen wireless monitor gives you the option of switching live to your cameras. The app for this device can be found in the App Store under the name of “TVAC16000”. If you want to access the live picture when you are out and about, proceed as follows: Network connection Make sure that the monitor is in the docking station, the mount is connected to the internet, the connection to the internet is established... - Page 27 English Connection status If you have added you system successfully, the name of your system and the current connection status appear. Click on the screen to go to the live view. System name e.g. System 1 Connection status Connected = you are connected with your system Disconnected = there is no connection to the system Adding the system...
-
Page 28: Maintenance And Cleaning
English Saving the PIN code If you want to save a PIN code for this APP, proceed as follows: 1. Open the “Setup PIN Lock” at 2. Enter a 4-digit PIN code and repeat it. 3. Put a tick at “Enable lock when starting”. When you have saved a PIN code, it will be requested when you want to open the app. -
Page 29: Technical Data
English 10. Technical data Camera 7" monitor Number of IR LEDs Rechargeable battery running time 1.5 hours Li-Ion polymer battery, 3.7 V / Battery type 1800 mA Resolution 640 x 480 pixels 800 x 480 pixels Image sensor 1/4" CMOS Angle of view 60°...