Siren Delay; System Rearm - Abus Terxon MX Installation Instructions Manual

5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.

040 System Rearm

To change the property of the siren duration:
UK
1. On the control unit, enter:
2. The LCD display shows: 040:Rearm=Never
3. Via the keypad, select from the following items
and press:
0
1-4
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
040
Rearm=Never
If an alarm is triggered, the alarm is
sounded until the defined alarm time of
the external signaller. If a second
sensor reports another alarm following
expiry of the defined alarm time, no
second alarm is triggered.
Rearm 1-4/Always
If an alarm is triggered, the alarm is
sounded until the defined alarm time of
the external signaller. The alarm centre
rearms itself once, twice, three times or
always, depending on the value
entered. A new alarm reports triggers a
new alarm.

041 Siren delay

Proceed as follows to change the property of the siren
delay:
1. On the control unit, enter:
2. The LCD display shows: 041:Bell Dly=0
3. Via the keypad, select from the following items
and press:
Bell Dly=0
0
After an alarm is triggered, a local alarm
is started without delay.
Bell Dly=1.5
1
After an alarm is triggered, a local alarm
is activated after a delay of 1.5 minutes.
Bell Dly=3
2
After an alarm is triggered, a local alarm
is activated after a delay of 3 minutes.
Bell Dly=5
3
After an alarm is triggered, a local alarm
is activated after a delay of 5 minutes.
Bell Dly=10
4
After an alarm is triggered, a local alarm
is activated after a delay of 10 minutes.
Bell Dly=15
5
After an alarm is triggered, a local alarm
is activated after a delay of 15 minutes.
Bell Dly=20
6
After an alarm is triggered, a local alarm
is activated after a delay of 20 minutes.
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
54
041