Exit Delay Time Internal D - Abus Terxon MX Installation Instructions Manual

079 Exit delay time internal D

To change the property of the exit delay time for internal
active D:
1. On the control unit, enter:
UK
2. The LCD display shows: 079: Exit D=10
3. Via the keypad, select from the following items
and press:
1
2
3
4
5
6
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
079
Exit D=10
Exit delay time for
internal active D: 10 seconds.
Exit D=20
Exit delay time for
internal active D: 20 seconds.
Exit D=30
Exit delay time for
internal active D: 30 seconds.
Exit D=45
Exit delay time for
internal active D: 45 seconds.
Exit D=60
Exit delay time for
internal active D: 60 seconds.
Exit D=120
Exit delay time for
internal active D: 120 seconds.
080 Forbikobler door bell
Proceed as follows to change the property of the
Forbikobler door bell:
1. On the control unit, enter:
2. The LCD display shows: 080: Chime OFF
3. Via the keypad, select from the following items
and press:
Chime OFF
Pressing the Forbikobler door bell does
0
not activate the loudspeaker of the
alarm centre.
Chime ON
Pressing the Forbikobler door bell
1
activates the loudspeaker of the alarm
centre.
4. Confirm your input. On the control unit, enter:
.
5. The control unit acknowledges your input with a
double "beep" tone and shows Installer Mode.
66
080