Switching Between Systems; Auto Subscribing Handsets - Avaya DECT Installation Manual

Switching Between Systems

Auto Subscribing Handsets

DECT - Installation Manual
38HBKD0001SAH – Issue 14 (27th October 2003)
If the phone has been subscribed to several systems, you must select
which system to currently use. For multi-site working this only needs to be
performed once at each site provided that AUTO is selected when creating
a system (see below).
1. Press MENU and then > until LOGIN appears, then press
SELECT LOGIN appears, press
2. Press > until required SYSTEM number appears.
3. When the required SYSTEM number appears, press
bleeps and SELECT LOGIN.
Either, press MENU to exit, or , for multi-site working, press
4. For multi-site working, you must visit each site and allocate a discrete
system number to it. E.g. for site 1, allocate SYSTEM 1 and for site 2,
allocate SYSTEM 2, etc.
5. Where multi-site working is required, press > until required AUTO
appears and press
6. Your handset bleeps and SELECT LOGIN is displayed.
7. Press MENU to exit.
When moving between two locations, both equipped with DECT systems,
you can set a handset to automatically subscribe to the other DECT
system provided that the handset at been registered on both systems
(consult your system manager for details).
To set auto subscription on a 20DT Handset
1. Press MENU and then > until LOGIN appears, then press
LOGIN appears
2. Press CURRENT SYSTEM and the ID of that system appears.
3. Press > until AUTO LOGIN and then press
.
. (You only need to do this once at an site).
Installation - Page 27
.
. Your handset
.
. SELECT
to finish.
Page 27
Switching Between Systems