Message; Voicemail - TIPTEL IP-284 Manual

Enterprise IP Phone
4) During the conference, press the Split hot key to split the conference into two hold
lines, and press the Resume hot key to resume the chosen call respectively.
5) Hang up to disconnect all parties.

Message

The phone supports SMS (Short Messaging Service) and Voicemail, if you want to use
them, please make sure that your VoIP telephony system supports this functionalities
and your accounts' message has been enabled.

Voicemail

Your voice mailbox messages, which are usually stored on a media server of your local
or hosted VoIP telephony system, can be accessed from your phone.
New voice messages can be indicated both acoustically and visually as described below:
The idle screen will indicate the new voice messages coming:

The MESSAGE button will be lighted.

To configure the Voicemail code via Phone interface:
1) Press MESSAGE button to enter the setting interface of Voice Mail account 1.
2) Enter the code which the phone uses to connect to your system. Press 123 hot key
to choose the proper input method.
3) Press Save to save the change, press Back to return to the previous menu.
Note:
Please contact your system administrator for the connecting code. Different systems
have different codes.
To retrieve the new voicemail via the Phone interface:
1) Press the Voicemail hot key directly.
2) You may be prompted to enter the password which is needed to connect to your
VoIP telephony system. It depends on your system.
3) Your voice mailbox is called and you are able to listen to your new and old
messages.
Note:
Using the Basic Call Functions
- 39 -