Mac Os Upgrades - Snom ONE IP Technical Manual

2. Navigate to the working directory and rename the
it corresponds with the old version number (e.g.,
Keep the file in the directory so that you can later determine which software
version is associated with which file. This step can be done while the system is
running.
3. Go to wiki.snom.com and download the new executable (click the Existing
Installations Only link).
4. Place the file into the
5. Rename the new file
6. Restart the system.

Mac OS Upgrades

To upgrade snom ONE on a MAC, navigate to wiki.snomone.com, select Downloads,
and follow the Mac OS installation instructions on page 7 of this manual. If for any
reason you see errors, follow the steps below:
1. Back up the working directory. This is where all the configuration files reside.
The default working directory is
2. Manually delete
3. Install the new version.
In some cases, the software may have installed successfully, but still the old version is
running. In such cases, stop the PBX, remove the link, then recreate it. Instructions are
detailed below:
snomONE working directory.
pbxctrl.exe
/usr/Applications/snom
/Library/snomone/
Chapter 1: Getting Started
pbxctrl.exe
pbxctrl-2.0.3.1713
.
*
19
file so that
).
.