Table of Contents
Advertisement
Add the Exchange Gateway to Your Current Dial Plan
1.
From the Dial Plans tab, click the edit icon next to your dial plan.
2.
From the dropdown in the top entry, select MS-Exchange.
3.
Enter
7*
as the pattern and
Note: The digit(s) that are entered into the pattern field must match the digit(s)
that were used in the External Voicemail System field (Domain > Settings).
For example, if you used
tern in the dial plan.
4.
Click Save.
Set the snom ONE External Voicemail System
The redirection target should be a telephone number, rather than a SIP URI, and it
must be possible to dial that number through the dial plan (the extension must have the
permission to do that). The replacement fields known from the caller-ID representation
in the trunks can be used (e.g., in the image shown below,
extension number). The redirection to the mailbox works only if the mailbox is enabled
for that account.
1. Go to the voicemail settings in the domain, and clear the Mailbox Direct Dial
Prefix field; otherwise, it will interfere with the mailbox redirection logic and
create an endless redirection loop.
Appendix C: snom ONE and Exchange
*
as the replacement.
99$u
in that field, then you can use
99*
as the pat-
$u
will be replaced with the
533
Advertisement
Table of Contents
