Table of Contents
Advertisement
Outbound Settings
26. Prefix: This setting is used as a representation of the system when making out-
bound calls. The system will add the prefix to the front of all calls leaving the
trunk. (See also "Generating the ANI" on page 128.)
27. Global: This setting is used only in multi-domain environments. When it
is enabled, calls that come in on this trunk are permitted to jump into other
domains if a match is found on a global alias name. (If the direction is not
only inbound, then other domains may use this trunk in their dial plans for
outbound calls.) When this setting is disabled, the system does not search for
tel:-alias names.
28. Trunk ANI: You can configure each trunk with an ANI (Automatic Number
Identification). ANI is a service that tells the recipient of a telephone call the
telephone number of the person making the call. In most cases, the ANI is
used in the
29. Remote Party/Privacy Indication: This setting tells the system how to present
the caller-ID on the trunk (see "Caller-ID" on page 127).
From
field in the SIP packets or the caller ID.
Chapter 4: Trunks
139
Advertisement
Table of Contents
