Table of Contents
Advertisement
The Country Code setting corresponds to the Rewrite global numbers set-
ting (page 140):
•
Area Code: This is the telephone area code for the domain. This is generally
NPA in the NPA-NXX-XXXX number (e.g.,
•
Default ANI: Using this setting, you can configure each domain with a de-
fault ANI (Automatic Number Identification). ANI is a service that tells the
recipient of a telephone call which telephone number made the call. In most
cases, the ANI is used in the
•
Trust Caller-ID: This setting is used to specify whether the caller-ID should
be used to authenticate, rather than asking users to enter their PIN numbers.
•
Emergency Numbers: You can specify special destination numbers when an
extension dials an emergency number. The number(s) that trigger the mecha-
nism must be listed in this setting. If you have more than one emergency
number, use a space between the numbers (e.g.,
setting is blank (i.e., it is not set to 911).
•
Use last 7 digits when cellphone matching: If this is checked, the system
will use the last 7 digits to match cell phone numbers. This is useful in places
where only 7 digits are used in the caller-ID.
•
Send welcome email when an extension is created: If this setting is
checked, new users will automatically receive a welcome email.
Chapter 3: Administering the Domain
978
From
field in the SIP packets or the caller-ID.
,
212
, etc.).
911 199
). By default, this
95
Advertisement
Table of Contents
