Table of Contents
Advertisement
Deploying the snom ONE IP Telephone System
132
1. Name: This setting allows you to name the trunk (the name and type of trunk
can be changed at any time).
2. Type: See "Trunk Types" on page 114.
3. Direction: Traffic can be limited to either inbound traffic or outbound traffic.
•
Inbound and outbound: Typical setting.
•
Inbound only: Limiting traffic to inbound traffic prevents users from using
the trunk for unauthorized calls.
•
Outbound only: Enable this setting if you are using a trunk for outbound
traffic only. It makes it easier for the system, as the trunk will not try to
match inbound traffic to this trunk.
4.
Trunk Destination: This setting is useful when connecting to an Exchange
server. Depending upon the setting, the SIP headers will be altered. If NBE is
selected, additional options are made available (2, 4, 8, or 12 ports).
5. Display Name: The display name is used for display purposes in the trunk
listings page. This setting is the friendly name of the SIP
changed at any time.
From
field and can be
Advertisement
Table of Contents
