Water Separator 2 - Siemens E382 EH81E 061 01 03 02 Service Manual

Compressor Compact
E382 EH81E 061 01 03 02

Water separator 2

To remove water separator 2
• Open the front cover and remove the rear
cover and the casing as described in the
6
section Compressor covers.
• Disconnect the water tube (1) from the
metal bowl.
• Unscrew the metal bowl (2).
7
• Remove the plastic shield (3) and the filter
insert (4). Note – The filter insert (4) and
the O-ring (5) must be replaced at the
8000 hour overhaul.
• Disconnect the air tube (6).
• Use a 14 mm open-end wrench to unscrew
5
the water separator housing (7).
4
To refit water separator 2
• The procedure for refitting water separator
2 is the reverse of the removal procedure
previously described.
3
2
1
Siemens-Elema AB
Disassembling and assembling
33