Compressor - Siemens E382 EH81E 061 01 03 02 Service Manual

Compressor Compact
8 11 12
9
10
6
7
2
1
3
4
15 16 17
E382 EH81E 061 01 03 02
18 19
Siemens-Elema AB

Compressor

To disassemble the compressor
• Remove the compressor/motor unit as
described in the section Compressor/motor
unit.
• Loosen the four screws (1) and lift off the
fan shroud (2).
• Disconnect the manifold pipe (3) and
13
remove the rubber seals (4)*.
• Disconnect the heat convector (5).
• Using a 3/16" hexagonal wrench, remove
14
the four cylinder head screws (6).
• Remove the:
– Cylinder head (7)
– Head gasket (8)*
– Outlet valve (9)*
5
– Valve plate (10)
– Inlet valve (11)*
– Cylinder gasket (12)*.
• Using a 3/16" hexagonal wrench, remove
the two cylinder screws (13) and lift off the
cylinder (14)
• From the piston, remove the:
– Piston rings (15 and 17)*
– Piston seals (16 and 18)*
– Rider ring (19)*.
*) Included in the 8000 hour maintenance kit.
Disassembling and assembling
29