Pre-Operation Checks; Hull; Jet Pump Water Intake - Sea-doo GS 5626 Operator's Manual

PRE-OPERATION CHECKS

Some of the following items may not have been previously covered in this Guide,
however they will be described in the MAINTENANCE or SPECIAL PROCE-
DURES section. Please refer to these sections to have more detailed informa-
tion.
Prior to your daily ride, verify the following:
Safety lanyard must always be removed from switch prior to verifying
any of the following.
ITEM

Hull

Jet pump water intake

Bilge
Battery
Fuel and oil tanks
Engine compartment
Fire extinguisher
Steering and throttle systems
Reverse system (if applicable)
VTS (if applicable)
Safety lanyard, engine start/stop
button
Hull
Inspect hull for cracks or damage.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage cooling system
or propulsion unit. Clean as necessary.
If any obstruction can not be removed,
refer to an authorized dealer for servic-
ing.
WARNING
OPERATION
Inspect.
Inspect/clean.
Drain. Ensure plugs are secured.
Inspect tightness of cables and retaining
strap(s).
Refill.
Verify for any fuel leak/odor.
Inspect condition/mounting.
Check operation.
Check operation.
Check operation.
Check operation.
F01J3ZY
TYPICAL
1. Inspect this area
www.SeaDooManuals.net
1
41