Break-In Period; Engine; 10-Hour Inspection - Sea-doo GS 5626 Operator's Manual

BREAK-IN PERIOD

Engine

With Bombardier-Rotax
engines, a break-in period is required
before operating the engine at full
throttle. Engine manufacturer recom-
mendation is about 10 operating hours.
During this period, maximum throttle
should not exceed 3/4, however, brief
acceleration and speed variations con-
tribute to a good break-in. Continued
wide open throttle accelerations, pro-
longed cruising speeds and overload-
ing the engine are detrimental during
the break-in period.
To assure additional protection during
the initial engine break-in, BOMBAR-
DIER ROTAX INJECTION OIL should
be added in the fuel tank for the first
full fuel tank filling only.
MODELS
SPX
GS, GSX Limited,
GTI and
GTX Limited
XP Limited
and GTS
®
watercraft
QUANTITY
700 mL
(24 oz)
1 L
(1.05 qt)
900 mL
(30 oz)
www.SeaDooManuals.net
To add injection oil in the fuel tank, pro-
ceed as follows:
Fill fuel tank with approximately 15 li-
ters (4 gal) of gasoline; then, add the
required quantity of injection oil in the
fuel tank.
Fill up fuel tank with gasoline. Do not
overfill.
-
CAUTION
It is important to proceed in this
order to allow a proper mixing of
the oil in the gasoline.

10-Hour Inspection

It is highly recommended that after
the first 10 hours of operation, the wa-
tercraft be checked by an authorized
dealer. This inspection will also pro-
vide the opportunity to discuss the un-
answered questions you may have en-
countered during the first hours of
operation.
The 10-hour inspection is at the
expense of the watercraft owner.
39