Vacuum Bailer Pick-Ups; Water Tank Trap Drains - Sea-doo GS 5626 Operator's Manual

F01J5CY
TYPICAL
1. Push on arrow pointing upward on VTS
button
2. No interference
3. Nozzle up
Push on arrow pointing downward on
VTS button until VTS stops. The nozzle
must be down and it must not inter-
fere with the venturi.
1
F01J5BY
1. Push on arrow pointing downward on VTS
button
2. No interference
3. Nozzle down
If VTS needs to be readjusted, refer to
an authorized dealer.
-
CAUTION
Trim ring and/or nozzle must not
interfere at any position.
66
2
1
2
www.SeaDooManuals.net

Vacuum Bailer Pick-Ups

They are located each side of the drive
shaft tunnel.
3
Two pick-ups use a low pressure area
in the jet pump to siphon the water
out of the bilge.
Inspect each pick-up screen for ob-
structions, clean as necessary.
F01L7RY
TYPICAL
1. Vacuum bailer pick-ups

Water Tank Trap Drains

GTS Model
3
Open storage cover and check for
possible obstructions at drain outlets.
F02L3KY
1. Outlets
1
1