Rough/Choppy Water Operation; Crossing Waves - Sea-doo GS 5626 Operator's Manual

Attach the safety lanyard to the opera-
tor's PFD and snap the cap to the
switch before starting the engine.
Start the engine.
Operator with a Passenger
The operator climbs on the watercraft
the same way as explained previously.
In choppy water, the passenger, while
in the water, may hold the watercraft
to help the operator in climbing aboard.
F01L4MY
The passenger then climbs on the wa-
tercraft while the operator maintains
balance by sitting as close as possible
to the console.
F01L4NY
50
F01L4OY
Attach the safety lanyard cap to the
switch before starting the engine.
Do not start engine until the pas-
senger(s) are properly seated.
Rough/Choppy Water
Operation
Avoid operation in these conditions. If
you must do so, proceed with caution
using minimum speed.

Crossing Waves

Reduce speed.
Always be prepared to steer and bal-
ance as necessary.
When crossing wakes, always keep a
safe distance from boat ahead.
When crossing wakes, slow down.
Operator and passenger(s) can
brace themselves by posting. Do
not jump waves or wakes.
www.SeaDooManuals.net
WARNING
WARNING