Table of Contents
Advertisement
DAILY PRE-OPERATION CHECKS
Some of the following items may not have been previously covered in this guide,
however they will be described in the MAINTENANCE or SPECIAL PROCE-
DURES section. Please refer to these sections to have more detailed information.
Safety lanyard should always be removed from its switch prior to verify-
ing any of the following.
ITEM
Hull
Jet pump water intake
Bilge
Battery
Fuel tank and oil reservoir
Engine compartment
Fire extinguisher
Steering and throttle systems
Reverse system
Safety lanyard, engine
start/stop button
Hull
Inspect hull for cracks or damage.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage cooling system
or propulsion unit. Clean as necessary.
If any obstruction can not be removed,
refer to an authorized Sea-Doo dealer
for servicing.
WARNING
OPERATION
Inspect.
Inspect/clean.
Drain. Ensure plugs are secured.
Inspect tightness of cables and retaining strap(s).
Refill.
Verify for any fuel leak/odor.
Inspect condition/mounting.
Check operation.
Check operation.
Check operation.
F01J3ZY
TYPICAL
1. Inspect this area
Inspect leading edges of the impeller,
if they have nicks or bends perfor-
mance will be greatly reduced.
www.SeaDooManuals.net
1
33
Advertisement
Table of Contents
