Fuses - Sea-doo GS 5626 Operator's Manual

Fuses

SPX Model
The electrical system is protected with
4 fuses.
Two 15 A fuses protect the charging
system. One fuse is mounted on the
MPEM located in the front electrical
box and the other one is in the rear
electrical box. If the battery is regularly
discharged, check fuses.
A 5 A fuse protects the starting sys-
tem, accessories and controls. The
fuse is mounted on the MPEM locat-
ed in the front electrical box. If the
starter does not operate, check condi-
tion of this fuse.
A 7.5 A fuse protects the variable trim
system (VTS). The fuse is located in
the rear electrical box.
To access fuses in the front electrical
box, open storage compartment cover
and remove basket.
Unplug connectors of the front electri-
cal box.
Unclip the electrical box from its seat
and remove it.
Open the electrical box.
1
F01H79Y
FRONT ELECTRICAL BOX OPENED
1. MPEM
2. Spare fuse holder
3. Fuse caps
2
3
www.SeaDooManuals.net
Remove fuse caps to check fuse con-
dition.
To access fuses in the rear electrical
box, remove seat and vent tube sup-
port.
Unclip cover of rear electrical box and
move cover beside box.
1
F01H5KY
REAR ELECTRICAL BOX OPENED
1. Fuse holders
Unclip and pull out fuse connector to
check fuse condition.
GTS Model
The electrical system is protected with
2 fuses.
A 15 A fuse protects the charging sys-
tem. If the battery is regularly dis-
charged, check fuse condition.
A 5 A fuse protects the starting sys-
tem, accessories and controls. If start-
er does not operate, check fuse condi-
tion.
Fuses are located in the electrical box,
mounted on the MPEM.
To access fuses, unclip and move
away electrical box from its seat.
Open the electrical box.
Remove fuse caps.
67