User Set-Up Menu; Alternating Course Knob Icon; Standby Mode - Simrad AP25 Manual

Simrad AP25 Autopilot

2.24 User Set-up Menu

In the AP25, all modes except NFU and FU have a
complemental User Set-up menu. You can easily access
the set-up menu by a quick double press on the
INFO/SETUP button.
Quick double press
to access

Alternating Course Knob Icon

When the course knob is used in the User Set-up menu, an
icon will alternate with the mode index to tell that no course
changes can be made unless you press the mode button.
The user set-up menu times out 30 seconds after the last
operation in the menu.

STANDBY Mode

Backlight
NAV source
50
Scroll through the menu
The backlight of the display and buttons may
be adjusted to 10 levels (10 = brightest). The
setting is stored when the system is turned
off. Adjustment is local to the control unit
you adjust or synchronized with other units
in the Simrad Group (page 131).
Select the source for NAV mode steering
e.g. CP34.
Use the course knob
to change a value or a
setting
20221495F