To Find Out Whether Sunvts Is Installed; Installing Sunvts; Viewing Sunvts Documentation; Table 5-1 Sunvts Tests - Sun Microsystems Fire V240 Administration Manual

TABLE 5-1
SunVTS Test
env6test
ssptest
i2c2test

To Find Out Whether SunVTS Is Installed

Type:
# pkginfo -l SUNWvts
If SunVTS software is loaded, information about the package will be displayed.
If SunVTS software is not loaded, you will see the following error message:
ERROR: information for "SUNWvts" was not found

Installing SunVTS

By default, SunVTS is not installed on the Sun Fire V210 and V240 servers. However,
it is available on the software supplement CD supplied with Solaris. For information
about downloading it from this CD, refer to the Sun Hardware Platform Guide for the
release of Solaris you are using.
To find out more about using SunVTS, refer to the SunVTS documentation that
corresponds to the Solaris release that you are running.

Viewing SunVTS Documentation

The SunVTS documents are included on the Software Supplement CD that is part of
each Solaris Media Kit release and is also accessible at http://docs.sun.com.
For further information, you can also consult the following SunVTS documents:
SunVTS User's Guide describes how to install, configure, and run the SunVTS
diagnostic software.
50 Sun Fire V210 and V240 Servers Administration Guide • April 2003
SunVTS Tests
Description
Tests the environmental devices
Tests ALOM hardware devices
Tests I2C devices for correct operation