Distinguish Error Cause; Error Indication; Error Messages Appearing On The Lcd - Brother DCP-8085DN Service Manual

2. DISTINGUISH ERROR CAUSE

2.1

ERROR INDICATION

To help the user or the service personnel promptly locate the cause of a problem (if any), the
facsimile equipment incorporates the self-diagnostic functions which display error messages
for equipment errors and communications errors.
For the communications errors, the equipment also prints out the transmission verification
report and the communications list.

2.1.1 Error messages appearing on the LCD

Error Message
Access Error
Cartridge Error
Replace Parts
Drum
Replace Parts
Fuser Unit
Replace Parts
Laser Unit
Replace Parts
PF Kit MP
Replace Parts
PF Kit 1
Replace Parts
PF Kit 2
Comm.Error
Connection Fail
Type of Error
The device is removed
from the USB direct
interface while the data is
processing.
The toner cartridge is not
installed properly.
The drum unit is the end of
its life.
The drum unit counter was
not reset when a new drum
was installed.
It is time to replace the
fuser unit.
It is time to replace the
laser unit.
It is time to replace the
paper feeding kit for the
MP tray.
It is time to replace the
paper feeding kit for Tray
1.
It is time to replace the
paper feeding kit for Tray
2.
Poor telephone line quality
caused a communication
error.
You tried to poll a fax
machine that is not in
Polled Waiting mode.
3-5
Action
Press Stop/Exit. Reinsert the device
and try to print with Direct Print.
Pull out the drum unit, take out the
toner cartridge that is indicated on
the LCD, and put it back into the
drum unit again.
Replace the drum unit.
1) Open the front cover, and then
press Clear/Back.
2) Press 1 to reset.
Replace the fuser unit.
Replace the laser unit.
Replace the PF Kit MP.
Replace the PF Kit 1.
Replace the PF Kit 2.
Send the fax again or connect the
machine to another telephone line.
Send the fax again.
Refer
to
-
3-34
3-14
3-15
3-15
3-14
3-15
3-15
3-62
-
Confidential