Brother DCP-8085DN Service Manual page 295

(4) Remove the Screw pan (S/P washer) M3.5x6 screw, and then remove the NCU shield
cover.
(5) Disconnect the connector of the NCU harness.
Screw, pan (S/P washer) M3.5X6
NCU harness
(6) Remove the two cup S M3x6 Taptite screws, and then remove the NCU PCB ASSY.
Taptite cup S M3x6
NCU PCB ASSY
Taptite cup S M3x6
NCU shield cover
Fig. 5-119
Fig. 5-120
5-95
NCU shield plate
NCU PCB ASSY
NCU shield plate
Confidential