Edge Actuator Spring - Brother DCP-8085DN Service Manual

(2) Slide the Roller holder ASSY to the direction of the arrow 2a. Then, lift up the gear side
of the Roller holder ASSY to the direction of the arrow 2b and pull it out to the direction of
the arrow 2c to remove.
Assembling Note:
• When assembling the roller holder ASSY, align the section "A" on the shaft of the roller
holder ASSY with the hole on the paper feed frame.

10.13 Edge Actuator Spring

(1) Remove the Edge actuator spring.
LT paper feed frame
Roller holder ASSY
2c
Fig. 5-236
Edge actuator spring
Fig. 5-237
5-166
"A"
2b
Paper feed frame
2a
Edge actuator
Hooks
Confidential