Acquisition Of White Level Data And Ccd Scanner Area Setting (Function Code 55) - Brother DCP-8085DN Service Manual

Laser fax/mfc

Hide thumbs Also See for DCP-8085DN:

Table of Contents

4.16 Acquisition of White Level Data and CCD Scanner Area Setting

(Function code 55)

This function allows the machine to obtain white level data for the CCD scanner and save it

together with the CCD scanner area into the EEPROM on the main PCB.

(1) Press the [5] key twice in the initial stage of the maintenance mode.

The "SCANNER AREA SET" will appear on the LCD.

(2) When setting of the scanner area is completed, a 4-digit number will appear on the LCD.

(e.g., 4723)

* If you press the [Stop/Exit] button at this point, the machine will beep for one second

and return to the initial stage of the maintenance mode.

Enter the input data value of a 5-digit number based on the 4-digit number to be

displayed referring to the table below. (e.g., 4723

(3) The machine saves the magnification compensation setting value into the EEPROM,

and then it beeps for one second and returns to the initial stage of the maintenance

Maintenance mode 55 required input data

Confidential

Chapters

Table of Contents

Mfc-8480dn Mfc-8880dn Mfc-8890dw Dcp-8080dn